How to Resolve Connection Issues for the Air Smart Feeder (AF108, PLAF108)

If you are unable to connect your Air Smart Feeder (AF108) to the app, follow the troubleshooting steps below to resolve the issue.

1. Reset the Router and Positioning

a. Reset your router and ensure it is positioned within 15 feet of the feeder.

b. Make sure your network only uses a 2.4 GHz band, as the Air feeder only supports a 2.4 GHz network.

2. Power the Feeder

Plug in the power cord and turn on the feeder by toggling the power button (refer to the following image) at the bottom of the feeder base to the "on" position.

3. Factory Reset the Feeder

Perform a factory reset by holding down the reset button at the bottom of the feeder base for three seconds. The indicator will flash white once every second, signaling that it is ready for the WiFi connection.

4. Connect via Different Methods

Exit the app, reopen it, and select the "ADD DEVICE" icon in the upper corner of the home page to add the device to the app. If the Bluetooth method fails, try the Device Hotspot Method. For detailed instructions, refer to this video: 

Connect to App | PETLIBRO Air Wi-Fi Feeder

5. Use a Mobile Hotspot

If possible, enable a temporary mobile hotspot WiFi on another phone and attempt to add the feeder to the app via this shared Wi-Fi.

Still need help? Submit a request.